0-10 Volt Dimming Wall Switch Occupancy Sensor

DT WLS DIM-BK

0-10 Volt Dimming Wall Switch Occupancy Sensor

DT WLS DIM-BK

Item no. 54550

Dualtech PIR & 40 kHz Ultrasonic. 0-10 Volt Dimming.Wall Switch Occupancy Sensor. The DT WLS DIM is a line voltage, Passive Infrared (PIR) and 40 kHz Ultrasonic wall switch occupancy sensor with 0-10 volt dimming capability intended to control lighting in commercial spaces. The combination of both technologies enhances occupancy detection in difficult applications. DIP switch adjustable technology options to initiate the load ON and maintain the load ON with either or both technologies. Control options via smart remote include photocell force OFF or hold OFF and partial ON or partial OFF capabilities. The convenient “Switch Link” feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multi-way switching.

  • 0-10 volt dimming PIR & 40 kHz ultrasonic wall switch occupancy sensor
  • Trigger mode settings enable what sensing technologies are used to initially turn the load ON and what technologies are used to keep the load ON
  • Adjustable ultrasonic reach setting from 25% to 100%
  • Line voltage lighting control (120/230/277 VAC, 50/60 Hz)
  • 180° coverage pattern
  • Manual ON or Automatic ON option
  • Manual ON or Automatic ON option
  • Partial OFF can be adjusted from 10-50%
  • Hold OFF or Force OFF light level feature
  • Mounts to a single-gang NEMA-style, standard switch box & decorator-style wall plate by others
  • “Switch Link” communication allows for up to 4 sensors to be grouped together
  • IQ Mode dynamically adjusts the ‘ON’ time delay by learning individual room occupancy
  • Walk through mode option will switch the load OFF in 3 minutes if no additional detection occurs after the first 30 seconds
  • Visible alert feature provides a momentary OFF/ON blink, warning that the load will shut OFF in 10 seconds unless additional motion is detected
  • Service mode option deactivates the automated functions of the sensor and the load is only manually controlled using the ON/OFF button
  • Optional voltage barrier included to provide separation from class 1 and class 2 circuits