• About STEINEL
  • Products
  • Resources
  • Sales
  • Tech Support
  • Press
Home >  Lighting Controls >  Products >  Presence / Occupancy Detectors >  IR Quattro HD DIM-24 > 

IR Quattro HD DIM-24    
Presence Detector
 
Overview    
The IR Quattro HD DIM-24 is a low voltage, high definition, passive infrared presence detector that is setting a new standard in lighting control. Featuring 1-10 volt dimming coupled with four pyroelectric detectors and a high performance lense system that creates 4,800 presence detection switching zones. Provides superior presence detection, energy savings and occupant convenience.  Lighting is controlled in relation to both the presence of motion and ambient light levels. Operational choices of manual on or auto on with either momentary or maintained switch options. The Stay ‘ON’ time DIM before ‘OFF’ option provides basic illumination for the selected stay-’ON’ time when ambient light falls below the selected brightness threshold that is set. This can be dimmed to 10% of maximum light intensity. As soon as a person is detected, the sensor switches either to 100% light intensity (constant-lighting controller ‘OFF’) or adjusts to the preselected brightness level (constant-lighting controller ‘ON’). When no movement is detected and the occupancy time setting has elapsed, the sensor dims light levels back to basic brighness after the stay ‘ON’ time (1 min. - 30 min.) has expired or the daylight level exceeds the selected level of brightness. The innovative mechanical reach setting enables the designer with a precise method of controlling lighting zones by means of optimizing the sensors detection reach without compromising sensitivity providing true precise presence detection in the desired detection zone. Mounting options provide for 4" Square box, 4" Octagon box, Round 3.0 Mud-Ring or directly to the ceiling with quick mount spring tabs. Available time saving wireless remote commissioning set up tool and the user / occupant wireless remote provides addition convenience.

The Control PRO family of presence detectors are also available in multiple presence detection technologies for control of lighting as well as heating, ventilation and air-conditioning (as in the COM2-24 versions).
  • Low voltage (18-24 VDC/VAC) sensor for use with a power pack or building automation system
  • 1-10 volt dimming
  • Stay ‘ON’ time DIM before ‘OFF’
  • Constant light level DIM control option
  • Extremely High Definition PIR Presence Detection
  • 4 pyroelectric detectors
  • Mechanical reach setting
  • Square coverage pattern with 4800 switching zones
  • Remote commissioning and user controls
  • Manual ON mode (MAN) / Automatic mode (AUTO)
  • Momentary / Maintained switch option
  • ‘ON’ only / ‘ON’ & ‘OFF’ manual switching
  • IQ Mode dynamically adjusts the ‘ON’ time delay by learning individual room occupancy

Owner’s Manual
Data Sheet
Trifold


 
 
 
search login
 


Click here to cancel

You were trying to view a protected page.
Please login to gain access or cancel to go back to the site.
User ID:  
Password:  


Forgot your password?