• About STEINEL
  • Products
  • Resources
  • Sales
  • Tech Support
  • Press
Home >  Lighting Controls >  Products >  Presence / Occupancy Detectors >  DT CM-DIM > 

DT CM DIM    
Presence Detector
 
 
Overview    

The DT CM DIM-24 Dual Technology Presence Detector utilizes PIR and ultrasonic technologies to detect the  presence or signature of a person in a space. The logic options for initial “ON” and “Maintained” state of occupancy gives design engineers and installation contractors the choice for proper control of lighting and provides a 1-10 volt dimming output to control ballasts or driver lighting loads. Lighting is controlled in relation to the presence of motion, the user selected dim level by remote or momentary switch and ambient light levels. As soon as presence is detected, the sensor goes to either the last selected electric light dim level (constant-lighting controller ‘OFF’) or adjusts to the last selected electric light + daylight brightness level (constant-lighting controller ‘ON’). The “force off” light level feature will turn lights off when sufficient daylight is present for additional energy savings. When no movement is detected and the occupancy time setting has elapsed, the sensor dims light levels back to basic brightness.  After the Stay ‘ON’ time DIM before ‘OFF’ delay has expired, the light turns off.  STEINEL’s world class PIR optics and ultrasonic signal processing provide unparalleled line of sight and volumetric presence detection. Operational choices of auto on or manual on with a momentary or maintained switch input. The convenient “COM-Link” feature enables multiple sensors to link together via the communication link for peer to peer grouping achieving expanded detection zones with control set up functions set at only one primary sensor for the entire group. The available service and user wireless remotes provide simplified commissioning and occupant convenience.

  • Low voltage (18-24 VDC/VAC) sensor for use with a power pack or building automation system
  • 1-10 volt dimming
  • Stay ‘ON’ time DIM before ‘OFF’
  • Constant light level DIM control option
  • PIR & Ultrasonic (40 kHz) Presence Detection
  • Service and user wireless remotes available
  • Manual ON mode (MAN) / Automatic mode (AUTO)
  • Momentary / Maintained switch option
  • ‘ON’ only / ‘ON’ & ‘OFF’ manual switching
  • IQ Mode dynamically adjusts the ‘ON’ time delay by learning individual room occupancy

Owner’s Manual
Data Sheet
Trifold

 
search login
 


Click here to cancel

You were trying to view a protected page.
Please login to gain access or cancel to go back to the site.
User ID:  
Password:  


Forgot your password?